Need help?Do you have a question about the YOKOGAWA AXG150 and is the answer not in the manual?
General| Nominal Size | 15 to 150 mm |
|---|---|
| Process Connection | Flange, Wafer |
| Lining Material | PTFE, PFA, Ceramic |
| Measurement Range | 0 to 10 m/s |
| Output | 4-20 mA, Pulse, HART |
| Power Supply | 100 to 240 V AC, 24 V DC |
| Operating Temperature | -40 to 85°C |
| Protection Class | IP67 |
| Accuracy | ±0.3% of Reading |
Explains safety symbols (Warning, Caution) and general precautions for product handling.
Provides guidelines for using the manual and emphasizes safe product operation and system integration.
Details applicable standards, certificates, and technical parameters for explosion protection.
Specifies approved cable entry types and installation requirements for explosion protection.
Outlines essential installation steps and safety considerations for explosion protection.
Provides critical operational guidelines and warnings for handling explosion protection equipment.
Defines procedures and authorization requirements for maintenance and repair.
Lists specific conditions, environmental limits, and safety requirements for product use.
To Next Page