YOKOGAWA ADMAG AXG Series User Manual

User’s
Manual
Contents
1. Introduction
1.1 For Safe Use of Product ................................................1
1.2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Combination for Remote Sensor and
Remote Transmitter ..... .... .... .... .... .... .... .... ..................... .3
2. Receiving and Storage
2.1 Model and Speci cations Check .. .. . .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .. 4
2.2 Storage Precautions ... ... ....... ... .... ... ....... ... ....... ... .... ... ....4
3. Installation
4. Wiring
4.1 Wiring Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2 Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2.5 Recommended Cable for EtherNet/IP
communication ....... .... ....... .... .... ....... .... ....... .... .6
4.3 Cable Entries .................................................................6
4.4 Connecting to External Products of Integral
Flowmeter and Remote Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.4.1 Wiring Precautions for Power Supply Cables ..6
4.4.2 DC Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.4.3 Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.4.4 Connecting to External Products . . . . . . . . . . . . . . . . . . . . . . 7
4.4.5 Wiring Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. Basic Operating Procedures
5.1 Operation by Display unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.2 Display and Basic Con guration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.3 Display Mode and Setting Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.4 Parameter Setting from Display Panel ....................... 10
5.5 microSD Card Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.6 BRAIN Con guration Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.7 HART Con guration Tool . .. . .. . . .. . .. . . .. . . .. . .. . . .. . .. . . .. . .. . . .. . . 10
5.8 Modbus Con guration Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.9 FOUNDATION  eldbus Con guration Tool . . . . . . . . . . . . . . . . . . . . . . 11
5.10 EtherNet/IP Con guration Tool ... .. .. .. .. .. .. .. ... .. .. .. .. .. .. .. .. 11
6. Operation
6.1 Pre-operation Zero Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6.2 Zero Adjustment from Display Unit . .. . .. . .. . .. . .. . .. . .. . .. . .. .. 12
6.3 Hardware Switch Setting ............................................ 12
6.3.1 Integral Type and AXG4A Remote
Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6.3.2 AXG1A Remote Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.3.3 AXFA11 Remote Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . 13
7. Errors and Countermeasures (Display unit)
ADMAG TI Series
AXG Magnetic Flowmeter
EtherNet/IP Communication Type
Installation Manual
Difference to IM 01E22A01-01EN
IM 01E21A01-03EN-A
IM 01E21A01-03EN-A
1st Edition
Integral Flowmeter
This manual outlines the basic guidelines for installation
and wiring procedures. This manual is applicable only for
EtherNet/IP communication type. For the items which are
not covered in this manual, read the user’s manuals and the
general speci cations as listed in Table 1.1.
Remote Transmitter
Please read the following descriptions in conjunction with IM 01E22A01-01EN.
This document only applies to AXG produced at Yokogawa Corporation of America and sold to North/Central America.
AXG Magnetic Flowmeter

YOKOGAWA ADMAG AXG Series Specifications

General

Brand	YOKOGAWA
Model	ADMAG AXG Series
Category	Measuring Instruments
Language	English

Summary

Introduction

For Safe Use of Product

Safety instructions for product handling and operation to prevent damage or impairment.

Trademarks

Lists registered trademarks related to the product's communication protocol.

Protection, Safety, and Alteration Precautions

Important safety guidelines regarding product protection, usage, and modifications.

Regarding This User's Manual

Provides context and reference to this specific user's manual.

Warranty

Combination for Remote Sensor and Remote Transmitter

Receiving and Storage

Model and Specifications Check

Guide to verify product model, suffix code, serial number, and specifications.

Storage Precautions

Recommendations for proper storage to maintain product integrity.

Installation

Wiring

Wiring Precautions

Essential precautions for safe and correct wiring procedures.

Cables

Information on types of cables and specific recommendations for EtherNet/IP communication.

Cable Entries

Details on how to properly use cable entries for wiring.

Connecting to External Products of Integral Flowmeter and Remote Transmitter

Guidelines for connecting the flowmeter to external devices.

Basic Operating Procedures

Operation by Display unit

Instructions for operating the device using its display unit.

Display and Basic Configuration

Overview of the display interface and initial configuration settings.

Display Mode and Setting Mode

Procedure to switch between display and setting modes for parameter adjustment.

Parameter Setting from Display Panel

Detailed steps for setting parameters via the device's physical display panel.

microSD Card Setting

Instructions for configuring or managing settings using a microSD card.

BRAIN Configuration Tool

Information on using the BRAIN configuration tool (not applicable for EtherNet/IP).

HART Configuration Tool

Information on using the HART configuration tool (not applicable for EtherNet/IP).

Modbus Configuration Tool

Information on using the Modbus configuration tool (not applicable for EtherNet/IP).

FOUNDATION fieldbus Configuration Tool

Information on using FOUNDATION fieldbus configuration (not applicable for EtherNet/IP).

EtherNet/IP Configuration Tool

Guide for configuring EtherNet/IP settings and connecting to the product.

Operation

Pre-operation Zero Adjustment

Procedure for performing zero adjustment before normal operation.

Zero Adjustment from Display Unit

Steps for adjusting the zero point using the device's display unit.

Hardware Switch Setting

Guide to configuring hardware switches for device operation and settings.

Integral Type and AXG4A Remote Transmitter

Specific instructions for hardware switch settings on integral and AXG4A remote types.

AXG1A Remote Transmitter

Information for AXG1A remote transmitter (not applicable for EtherNet/IP).

AXFA11 Remote Transmitter

Information for AXFA11 remote transmitter (not applicable for EtherNet/IP).

Errors and Countermeasures (Display unit)

System Alarm

Details of system alarms, error messages, descriptions, and countermeasures.

Process Alarm

Information regarding process alarms and their corresponding countermeasures.

Setting Alarm

Details on setting alarms and how to address them.

Warning

Provides warnings related to device operation or potential issues.

Information

General information messages displayed by the unit.