Do you have a question about the YOKOGAWA AXFA14C and is the answer not in the manual?
Repeatability | ±0.1% of rate |
---|---|
Measurement Range | 0 to 10 m/s |
Fluid Temperature | -20 to 80 °C (-4 to 176 °F) |
Operating Temperature | -20 to +60 °C (-4 to +140 °F) |
Output Signal | 4-20 mA, Pulse, HART |
Process Connection | Flanged |
Lining Material | PFA, Hard Rubber |
Electrode Material | Tantalum |
Protection Grade | IP67 |
Input Type | Flow, Totalizer |
Power Supply | 24 VDC, 100-240 VAC |
Essential safety guidelines for handling the magnetic flowmeter during installation, operation, and maintenance.
Recommendations for piping design, including straight run lengths and avoiding interference with magnetic fields.
Detailed procedures for installing integral flowmeters and remote flowtubes, including fitting dimensions and tightening.
Detailed steps and precautions for wiring the integral flowmeter, including power supply and signal connections.
Wiring procedures and precautions for the remote flowtube, including signal and excitation cable connections.
Wiring instructions and precautions for the AXFA14 remote converter, covering power supply and signal connections.
Wiring instructions and precautions for the AXFA11 remote converter, including power supply and output signal connections.
Procedure for pre-operation zero adjustment to ensure accurate flow signal output, using display unit switches or BT200.
Requirements and specifications for ATEX certified explosion-proof magnetic flowmeters and converters.
Technical data and electrical connection types for FM approved explosion-proof instruments, including temperature codes.
Technical data, standards, and certifications for CSA approved explosion-proof instruments, including temperature codes.
Cautions and technical data for TIIS certified explosion-proof equipment, emphasizing installation and wiring.