Need help?Do you have a question about the YOKOGAWA AXW4A and is the answer not in the manual?
General| Type | Electromagnetic Flowmeter |
|---|---|
| Relative Humidity | 5 to 95% RH (Non-condensing) |
| Lining Material | PTFE |
| Electrode Material | Hastelloy |
| Repeatability | \u00b10.1% of reading |
| Protection Grade | IP67 |
| Measurement Range | 0 to 10 m/s |
| Output Signal | 4-20 mA, HART |
| Power Supply | 24 VDC or 100-240 VAC |
| Operating Temperature | -20 to +60°C |
| Dimensions | Varies by nominal size |
| Weight | Varies by nominal size |
Explains safety symbols like WARNING, CAUTION, IMPORTANT, and NOTE used in the manual.
Details the manual's scope, copyright, warranty, error reporting, and specification limitations.
Lists trademarks and registered trademarks of Yokogawa Electric and other companies.
Provides guidance for the protection and safe use of the product and system.
Provides an overview of user responsibilities for SIS installation and operation for safety.
Details how to use the ADMAG TI Series flowmeter in SIS applications, covering safety function, accuracy, and diagnostics.
Guides on setting ranges, units, and performing calibration for SIS.
Lists parameters required for SIS safety level, including BRAIN/HART settings and hardware configurations.
Explains proof testing to verify Safety Instrumented Function works without failure, including test procedures.
Details procedures for repair, replacement, and bypass lines for product maintenance.
States the product generates a valid signal within 3 seconds with a 0.1s damping constant.
Notes that firmware updates are handled by YOKOGAWA and not by the user.
Refers to the FMEDA report for failure rates, modes, and SIL 3 capability.
States the expected product lifetime is 10 years, impacting reliability data validity.
Mentions environmental limits are specified in the general specifications document.
States application limits are in this manual; exceeding them invalidates reliability data.
Provides definitions for safety terms and lists common abbreviations used in the manual.
To Next Page
