Need help?Do you have a question about the YOKOGAWA AXW Series and is the answer not in the manual?
General| Type | Electromagnetic Flowmeter |
|---|---|
| Lining Material | PTFE |
| Electrode Material | Tantalum, Titanium |
| Repeatability | ±0.1% of rate |
| Conductivity | 5 μS/cm or greater |
| Output Signal | 4 to 20 mA DC, Pulse, Frequency |
| Communication | HART, BRAIN, Fieldbus |
| Power Supply | 100 to 240 V AC, 24 V DC |
| Protection | IP67 |
| Measurement Type | Flow rate |
| Operating Temperature | -20 to +60°C |
| Storage Temperature | -30 to +70°C |
| Dimensions | Varies depending on size and connection type. Refer to manufacturer's documentation. |
| Weight | Varies depending on size and connection type. Refer to manufacturer's documentation. |
Explains hazard symbols (WARNING, CAUTION, IMPORTANT, NOTE) and safety precautions for product handling.
Guidelines for using the manual, copyright, contact information, and company trademarks.
Essential safety instructions for protecting the product and system during use.
Details applicable standards, certificate, protection types (Gas/Dust), enclosure, and electrical specifications.
Details the marking codes for cable entry types (M, N) and their corresponding screw sizes.
Covers wiring compliance, unused apertures, dust area installation, and cable gland requirements.
Guidelines for operation, avoiding mechanical sparks, and specific warnings for opening covers.
Specifies that only authorized personnel can perform maintenance and repair on explosion protection products.
Explains the meaning of various fields and codes found on the product's name plate.
Special instructions for electrostatic charge, flameproof joints, and overvoltage category II installation.
To Next Page
