YOKOGAWA Daqstation DX2020 User Manual

11-12
IM 04L42B01-01E
Code Message
285 FTP data connection error.
Further details are provided by the character string that appears after error code 285.
CharacterStringandDetails
SOCKET
Failed to create a socket for the transfer connection.
*2
BIND
Failed the transfer connection command.
*2
CONNECT
Failed the transfer connection.
*2
LISTEN
Failed the transfer connection reception.
*2
ACCEPT
Failed to accept the transfer connection.
*2
SOCKNAME
Internal processing error.
*1
RECV
Failed to receive data over the transfer connection.
*2
SEND
Failed to send data over the transfer connection.
*2
286 FTP file transfer error.
287 FTP is failed because of file acquirement from external media.
290 SNTP access failure.
Further details are provided by the character string that appears after error code 290.
CharacterStringandDetails
DORMANT
Internal processing error.
*1
LINK
Data link is disconnected.
Check the cable connection.
291 SNTP server does not respond.
Further details are provided by the character string that appears after error code 291.
CharacterStringandDetails
TIMEOUT
Check that the server is running.
*2
292 Incorrect SNTP server setting.
Further details are provided by the character string that appears after error code 292.
CharacterStringandDetails
HOSTNAME
Failed the DNS lookup (search the IP address corresponding to the host name).
Check the DNS setting and the SNTP server name.
TCPIP
Internal processing error.
*1
293 Invalid SNTP server reply.
Further details are provided by the character string that appears after error code 293.
CharacterStringandDetails
SEND
A correct IP address has not been assigned to the DX.
Check the IP address.
BROKEN
There is a problem with the SNTP server.
If this error occurs even after executing SNTP manually several times, check the SNTP server.
11.1AListofMessages

YOKOGAWA Daqstation DX2020 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2020
Category	Recording Equipment
Language	English