YOKOGAWA Daqstation DX2020 User Manual

11-11
IM 04L42B01-01E
Troubleshooting
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
Code Message
CharacterStringandDetails
REPLY
Failed to receive data on the control connection.
Check that the server does not drop the connection and that it responds within the proper time
period.
SERVER
The server is not in a condition to provide the service.
Check that the server is in a condition in which service can be provided.
283 FTP command was not accepted.
Further details are provided by the character string that appears after error code 283.
CharacterStringandDetails
USER
Failed to verify the user name.
Check the user name setting.
PASS
Failed to verify the password.
Check the password setting.
ACCT
Failed to verify the account.
Check the account setting.
TYPE
Failed to change the transfer type.
Check that the server supports the binary transfer mode.
CWD
Failed to change the directory.
Check the initial path setting.
PORT
Failed to set the transfer connection.
Check that the security function is disabled.
PASV
Failed to set the transfer connection.
Check that the server supports PASV commands.
SCAN
Failed to read the transfer connection settings.
Check that proper response to the PASV command is received from the server.
284 FTP transfer setting error.
Further details are provided by the character string that appears after error code 284.
CharacterStringandDetails
MODE
Internal processing error.
*1
LOCAL
Internal processing error.
*1
REMOTE
The destination file name is not correct.
Check that you have the authority to create or overwrite files.
ABORT
File transfer abort was requested by the server.
Check the server for the reason for the abort request.
11.1AListofMessages

YOKOGAWA Daqstation DX2020 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2020
Category	Recording Equipment
Language	English