YOKOGAWA DX1012

38 IM 04L41B01-02E
Writing the Message “START”
Registering the Word “START” in Message Number 1
1 . Press MENU (switch to the setting mode) and select Message.
2 . Press the 1-10 soft key.
3 . Press the Input soft key.
Show the message registration windo
w
Select the digit: Left and right arrow soft keys
Enter characters: Arrow keys and DISP/ENTER
Delete a character: Use the arrow keys to select Del and press DISP/ENTER,
or press the Bs soft key.
Enter the input: Use the arrow keys to select ENT and press DISP/ENTER.
Cancel the setting: Press ESC before pressing DISP/ENTER.
For the input procedure, see “Entering Values and Characters” on page 16.
4 . Press DISP/ENTER.
5 . Press ESC or MENU to return to the operation mode screen.
Operation complete.
Operation