<1. INTRODUCTION AND GENERAL DESCRIPTION>
1-8
IM 12A01F01-02EN 2nd Edition : Feb. 19, 2019-00
l Jumper and Jumper holder
When you don’t need the jumpers, store them in the jumper holders located inside of the front
panel, to prevent them from being lost.
You can put jumpers anywhere among 5 holders (1A and 4Bs) as Figure 1.4.
A has a guide hole. B has clicks on both side of each holder.
A Bclicks
Figure 1.4 Jumper holders
1.3 Specication
See the latest specication. GS 12A01F01-01EN
To Next Page
Loading...
