Need help?Do you have a question about the YOKOGAWA FX1000 and is the answer not in the manual?
General| Storage Media | SD card |
|---|---|
| Communication Interfaces | Ethernet, USB |
| Power Supply | 100 to 240 VAC, 50/60 Hz |
| Operating Temperature | 0 to 50 °C |
| Input Types | Thermocouple, RTD |
| Accuracy | ±0.1% of reading ±1 digit |
Lists general safety guidelines and warnings for instrument operation.
Details symbols and precautions regarding product safety and modification.
Covers precautions for software, FX handling, and CF card usage.
Outlines responsibility exemptions and general warnings for safe operation.
Details the types of signals the FX can measure and sampling rates.
Explains continuous and event-based data recording methods.
Describes how measured data is presented on the FX display.
Lists and briefly describes additional capabilities like math and communication.
Introduces the accompanying software for data display and conversion.
Defines key terms used in the manual and operations.
Identifies and describes components on the front panel of the FX.
Identifies and describes connectors and terminals on the rear panel.
Explains the function of each button on the FX control panel.
Describes the different sections and elements of the FX display.
Details the information shown in the status bar and its indicators.
Guides configuration for temperature measurement channel, input range, and tag.
Details setting the FX's IP address for network communication.
Describes activating the FX's web server feature for remote access.
Explains how to access and view the FX interface on a computer.
Guides on saving network configuration settings on the FX.
Details PC-side network configuration for browser monitoring.
Covers verifying network connectivity using ping command.
Guides on accessing the FX interface via a web browser URL.
To Next Page
