Need help?Do you have a question about the YOKOGAWA FLXA402T and is the answer not in the manual?
General| Product Name | FLXA402T |
|---|---|
| Manufacturer | Yokogawa |
| Number of Sensors | 2 |
| Hazardous Area Approval | ATEX, IECEx, FM, CSA |
| Measurement Parameters | pH, ORP, Conductivity, Dissolved Oxygen |
| Output Signal | 4-20 mA |
| Communication | HART |
| Display | LCD |
| Enclosure | Plastic |
| Enclosure Rating | IP66 |
| Dimensions | 144 x 144 x 200 mm |
| Certifications | CE |
Details the purpose and scope of the FLXA402T Operation of Converter manual.
Explains the initial screens and navigation flow upon device startup.
Provides instructions for selecting the user interface language and initial setup.
Details how to create, manage, and use passwords for system security.
Describes the primary display screens: Home, Main, and Monitor.
Details the meaning and function of on-screen navigation icons.
Provides access to device information, analog I/O, and contact details.
Details how to view and manage event history for settings and alarms.
Explains how to display and configure trend charts for measured values.
Covers utilities like Save/Load, Modbus search, pairing, and password.
Guides on accessing and changing various operational parameters.
Covers language selection and factory reset procedures for the converter.
Details how to manually hold mA output values at preset points.
Explains the available parameters and their associated symbols.
Details how to configure mA input application types, ranges, and limits.
Explains configuration of contact inputs for wash, calibration, or range selection.
Covers configuration of mA output, including parameter slots and line forms.
Details the assignment of functions to contact outputs like Alarm, Maintenance, and Fail.
Guides on configuring home screen display items, lines, and names.
Explains how to assign MODBUS addresses to sensors for communication.
Details how to set up error notifications and alarm flashing behavior.
Explains how to configure logging of events like setting changes and alarms.
Instructions for saving and loading configuration data to/from SD card or internal storage.
Procedure to load specific configuration files for the converter or individual sensors.
Instructions for loading all sensor configuration data as the current configuration.
Process for saving the current configuration of the FLXA402T and connected sensors.
Instructions for exporting all configuration data to an SD card.
How to import set configuration data from an SD card to the FLXA402T.
Instructions for exporting logbook data files to an SD card.
Guidance on updating the converter and sensor software using an SD card.
Procedure to find sensor Modbus addresses for network connectivity.
Details on setting and managing passwords and operator IDs.
Instructions for calibrating and adjusting the touch screen panel for accurate input.
Details on cleaning the front window and handling the unit.
Guidance on diagnosing and resolving errors, fuse issues, and hardware problems.
To Next Page
