<5. Others (Converter)>
5-12
IM 12A01G01-03EN 1st Edition : Mar. 25, 2021-00
5.1.8 Export all logbook
You will export log book data les to SD card.
Figure 5.14 Export all logbook
When you open Export all logbook, “File name” is blank. Enter a le name to export. If you enter
more than one character, “Execute” becomes enabled.
Tap “Execute”, then you will start exporting logbook data with the le name you dened with le
extension.L00.
CAUTION
It takes approximately 30 seconds to export logbook data to SD card. Do not pull out the SD card
or power down while exporting.
You will export the data to “LogFolder.” You cannot modify the address. If you nd “LogFolder” in
the directory of SD card, you will export the data to the LogFolder. If not, you will create a folder
automatically.
If you enter a new le name but which already exists, a conrmation message for overwriting the
data pops up. Select overwrite or cancel exporting.
If exporting fails, a message “Failed” appears, for the following reasons:
SD card does not have enough space in the storage.
SD card is not inserted or not inserted appropriately
SD card is not formatted properly
If you tap [OK], you will return to the rst screen of Save/Load
To Next Page
Loading...
Need help?
General
