<3. Converter menu>
3-7
IM 12A01G01-03EN 1st Edition :Mar. 25, 2021-00
3.4 Converter Setting menu
Home/Main screen > > Converter menu> “Setting”.
Converter setting, Language, Initialization are available.
3.4.1 Converter setting
Home/Main screen > > Converter menu> “Settings”> Converter settings.
For details, read chapter 4. For details about Auto wash/calibration settings, read the user’s
manual of each connected sensors.
Figure 3.8 Converter settings
Select parameter to change. The parameter is highlighted. To execute the change, tap .
Figure 3.9 Converter settings, before setting (left), complete setting (right)
You can create password to protect each parameter. See 5.4 Password.
We recommend that you write down these parameters on “User Settings Table” we provide and
keep it for future use.
You can download “User Settings Table” from our website.
http://www.yokogawa.com/an/xa402t/download/
To Next Page
Loading...
