YOKOGAWA FLXA402T - Importing Configuration Data from SD Card

<5. Others (Converter)>
5-11
IM 12A01G01-03EN 1st Edition : Mar. 25, 2021-00
5.1.7 Import conguration
You will import set conguration data from SD card to FLXA402T.
NOTE
Importing by itself does not overwrite the database stored in FLXA402T. To overwrite, you need
to load the conguration. See 5.1.2 Load conguration.
Import conguration shows a list of Set name of folders that you want to import.
Figure 5.13 Import conguration
Tap one of the folders to import. You will see a list of address folders and set of congurations.
Select a setname to import in the list, then a dialog box appears. You cannot modify the set
names. After verifying the set name you select, tap “Execute” then the import starts.
If you enter a new Folder name but which already exists, a conrmation message for overwriting
the data pops up. Select overwrite or cancel importing.
Once you reach the limit number of user conguration les that can be stored in FLXA402T, you
won’t be able to import les any more, when a warning message appears.