Quick Reference Instruction Manual
Safety
General safety instructions
8 / 54
IM01U10A00-00EN-R, 2nd edition, 2017-08-29
▶ Continuous temperature fluctuations in excess of 100 °C may result in tube failure
due to material fatigue and therefore must be avoided.
▶ The operator is responsible for ensuring that design limits (pressure, temperature) are
not exceeded in the event unstable fluids decay.
▶ External influences may result in failure of threaded connections. The operator is re-
sponsible for providing suitable protective measures.
▶ Compression and shock waves in pipes can cause damage to the sensor. For this
reason it is important to avoid exceeding the design limits (pressure, temperature).
▶ Fires may result in increased process pressure (caused by temperature-related vol-
ume changes) and failure of gaskets. The operator is responsible for taking suitable
measures to prevent fire-related damage.
▶ Manufacturing methods and technologies have been successfully field-tested for
decades. Erosion and/or corrosion are not taken into account.
▶ Removal of material from the flow meter with power tools such as drills or saws is not
permitted.
▶ Any repair, modification, replacement or installation of replacement parts is permitted
only so long as it is in keeping with this user's manual. Other work must be first autho-
rized by Rota Yokogawa. Rota Yokogawa does not assume liability for damage
caused by unauthorized work on the flow meter or by improper use.
To Next Page
Loading...
Need help?
General
