IM 05C01F12-41E
2
1. NOTICE
The following safety symbol is used both on the product and in this user’s manual.
This symbol stands for “Handle with Care.” When displayed on the product, the operator should
refer to the corresponding explanation given in the user’s manual in order to avoid injury or death of
personnel and/or damage to the product. In the manual the symbol is accompanied by an explanation
of the special care that is required to avoid shock or other dangers that may result in injury or loss of
life.
The following symbols are used in this manual only.
Indicates that operating the hardware or software in a particular manner may lead to damage or result in
system failure.
Draws attention to information that is essential for understanding the operation and/or features of the
product.
To Next Page
Loading...
Need help?
General
