Yolink X3 User Manual

D Sensor Refresh Frequency
H
Both temperature and humidity values refresh when one
of the following conditions are met:
SET button
a. The SET
button has
been pressed
b. At least 9°F(5°C)
change over a period
longer than 1 minute
c. At least a 10%
change over a period
longer than 1 minute
d. Device alert level
reached or restored to
normal range
f. Otherwise, the
values will be
refreshed in each
recording interval
e. Refresh icon in
Device screen is
tapped
10

Yolink X3 Specifications

General

Brand	Yolink
Model	X3
Category	Temperature Controller
Language	English