Yolink X3 User Manual

Warnings
N
Please install, operate and maintain the X3 Temperature & Humidity
Sensor only as outlined in this manual. Improper use may damage the
unit and/or void the warranty
Use only new, name brand, lithium non-rechargeable AA batteries
Do not use rechargeable batteries
Do not use zinc blend batteries
Do not mix new and old batteries
Do not puncture or damage batteries. Leakage can cause harm on skin
contact, and is toxic if ingested
Do not dispose of batteries in fire as they may explode! Please follow
local battery disposal procedures
To avoid damaging the device, if storing the device for an extended
period, remove the batteries
Refer to Specifications (page 19) for the device environmental
limitations.
Do not obstruct the openings on the housing, as they are used for
temperature and humidity sensing
Do not install or use this device where it will be subjected to high
temperatures and/or open flame
This device is not waterproof and is designed and intended only for
indoor use.
Subjecting this device to outdoor environment conditions such as direct
sunlight, extreme hot or cold temperatures, rain, water and/or
condensation can damage the device and will void the warranty
Install or use this device only in clean environments.
Dusty or dirty environments may prevent the proper operation of this
device, and will void the warranty
If your Temperature & Humidity Sensor does get dirty, please clean it by
wiping it down with a clean, dry cloth.
Do not use strong chemicals or detergents, which may discolor or
damage the exterior and/or damage the electronics, voiding the
warranty
Do not install or use this device where it will be subjected to physical
impacts and/or strong vibration. Physical damage is not covered by the
warranty
Please contact Customer Service before attempting to repair
disassemble or modify the device, any of which can void the warranty
and permanently damage the device
20

Yolink X3 Specifications

General

Brand	Yolink
Model	X3
Category	Temperature Controller
Language	English

Summary

YoLink X3 Sensor Introduction

Essential YoLink Hub Requirement

Highlights the necessity of a YoLink Hub or SpeakerHub for the sensor's full functionality.

Installing the YoLink Mobile App

App Download and Account Setup

Instructions for downloading the YoLink app, signing up for an account, and allowing notifications.

YoLink App Initial Configuration

Initiating Device Addition

Guides on starting the device addition process by tapping 'Add Device' or the scanner icon.

Adding Your X3 Sensor to the App

QR Code Scanning for Device Pairing

Instructs to approve camera access and position the phone over the sensor's QR code for pairing.

Device Binding and Customization

Explains how to bind the device, edit its name, and assign it to a room in the app.

Confirming Successful Sensor Pairing

Device Bound Confirmation Screen

Physical Installation of the Sensor

Powering On and Sensor Placement

Instructions on turning on the sensor using the SET button and placing it on a stable surface or wall.

Environmental Operating Range Warning

Warns users to refer to specifications for environmental operating ranges and use outside them at their own risk.

Sensor Data Refresh Triggers

Conditions for Data Updates

YoLink App: Detailed Device Settings

Configuring Device Parameters

Device State, Model, and Serial Number

Signal Strength and Firmware Management

YoLink App: Alert Configuration

Setting Temperature and Humidity Alerts

Instructions on setting temperature and humidity alert ranges using sliders or pencil icons.

YoLink App: Advanced Alarm Strategies

Customizing Notification Channels

Explains how to set up app, email, and SMS notifications for device alerts and choose recipients.

Managing Alarm Trigger Actions

YoLink App: Automation Scenarios

Creating Sensor-Based Automations

Customizing Automation Notifications

Device Firmware Updates

Procedure for Firmware Updates

Explains how to check for and initiate firmware updates for optimal device performance.

Performing a Factory Reset

Factory Reset Steps

Provides step-by-step instructions for performing a factory reset by holding the SET button.

Technical Specifications of the Sensor

Electrical and Accuracy Specifications

Environmental Limits and Error Margins

Safety Warnings and Precautions

Battery and Handling Safety

Lists warnings regarding battery use, mixing batteries, and avoiding damage from punctures or disposal.

Environmental and Cleaning Safety

Advises against extreme temperatures, moisture, and using harsh chemicals for cleaning.

Physical Integrity and Repair Safety

Warns against physical impacts, strong vibrations, and unauthorized repairs that void the warranty.

YoSmart 2-Year Limited Warranty

Warranty Terms and Exclusions

Outlines warranty coverage for defects, exclusions for misuse, and limitations on repair or replacement.

FCC Compliance Information

FCC Regulatory Adherence

Radio Frequency Exposure Evaluation

Customer Support Channels

Methods for Obtaining Assistance