23
Water Leak Sensor 4 Settings:
IFTTT
Q
You can use the Water Leak Sensor 4 to trigger
IFTTT applets. You must have the IFTTT app
installed, the YoLink service installed and
connected to your YoLink app account.
Please note, IFTTT.com is a paid service,
typically offering 5 free applets.
1. Create a new applet in the IFTTT app.
2. For the If This section, search and select the
YoLink service.
3. Tap Flex Fob.
4. In the Device drop-down box, select your
Water Leak Sensor 4, tap Done.
5. In the Button drop-down box, select the
button. Tap Done.
6. In the Action drop-down box, select either
Press or Long Press. Tap Done.
7. 7DS&UHDWH7ULJJHUWRGHQHWKHDSSOHWDFWLRQV
to be assigned to this button.
8. Tap Continue to save your settings.
To Next Page
Loading...
Need help?
General
