33
Factory Reset
V
SET Button
Press for 20 to 30 Seconds
When directed by customer support, and/or as
an attempt to resolve a problem with your fob, it
may be necessary to perform a factory reset.
Factory resetting your fob returns it to the
factory default programming and settings. This
is a simple process:
Hold the SET Button for 20 to 30 seconds,
until the LED blinks red and green
alternately, then release the button.
Factory reset is complete when the LED stops
flashing.
Pressing the button for longer than 30 seconds
will abort the factory reset process.
Factory reset will not remove the fob from the
app. The only way to remove the fob from the
app is to delete it (in the app).
To Next Page
Loading...
Need help?
General
