Yongnuo YN200 User Manual

2.The meaning of [Link lamp]
[LINK]lamp
Statues
GREEN LAMP
Lit
Radio transmissing
RED LAMP
Lit
Flash trigging
GREEN LAMP
Flicker
Standby mode*
Meaning
Parts
Operations
In wireless mode, short press to enter channel setting and
long press to set ID.
Press this button and the flash will switch between different
flash modes.(Radio mode (YN560 SLAVE)/optical
transmission /S1/S2) in radio mode, long press the button to
switch between M/Multi mode.
It sets up wireless groupings, supports A-F slave groupings.
In different modes, short press to realize setting/confirming
function, such as channel, ID, strobe frequency, times, custom
function, long press to set custom function.
Press the [ +] button to increase parameters, and press the[-]
button to decrease parameters.
The flash is set to be power-on at the ON position and
shutdown at the OFF position.
Red light indicates full power, press test flash.
（Charging
lamp）
Power switch
*About the
Standby mode can reduce the power consumption, which is
enabled by the custom function. In mode, any
button or the radio master unit can awake the slave flash.
Standby mode(see page11 )
standby
1.Control panel
Basic Operations
-4-

Yongnuo YN200 Specifications

General

Brand	Yongnuo
Model	YN200
Category	Camera Accessories
Language	English