Basic Functions
length value flashes on the LCD panel, turn the [DIAL] until <M> is
displayed to the left of the <ZOOM> icon, you can manually adjust the
flash coverage (20, 24, 28, 35, 50, 70, 105, 135, 200mm).
When the camera's focus mode is set to AF-C, the mentioned focusing lamp
cannot be lit.
When the wide panel is used, the flash coverage will be expanded and locked
to 14mm.
8.Camera Menu Access (Only Supports Cameras Released
Recently)
On the cameras released recently with the [External Flash Setting] menu,
you can set the flash parameters through the camera menu, such as
adjusting the flash modes (TTL/M/Multi/Gr/OFF), wireless flash setting,
high-speed sync, exposure compensation, focal length etc.
9.Auto-assist Focusing Lamp
In low-light or low-contrast shooting environments,
when the camera cannot focus automatically or
correctly, the built-in assist focusing lamp will be
activated to help the camera to focus. This lamp can
be set to be on or off by setting flash custom function
C.Fn 04.
10.Power Saving Mode
The product is designed with a power saving
mode, which can be activated by custom
function settings. For specific settings, please
refer to the subsequent "Custom Function
Settings" section. With the power saving
mode is activated, the flash will be in sleep
status after being idle for a period, and if the
flash remains idle for a period of time after sleep mode, it will be
automatically turned off. To turn on the flash again, press the camera
shutter halfway or press the [TEST] button.
11.Overheat Protection
Continuous and rapid flash firing in short time may result the rise of
internal temperature of the flash. To avoid damaging the flash due to
overheating, the flash is designed with overheating protection function.
When the firing is too frequent, the LCD panel will show the < > icon
and the <Recycle Indicator> will blink in a single color. At this time,
please reduce the flash frequency or flash output appropriately.
Otherwise, the firing at a high frequency will activate the overheat
12
To Next Page
Loading...
Need help?
General
