Yongnuo YN650EX-RF User Manual

Nomenclature
3.Recycle Indicator Status
6.Sound Prompt Description
Overheat protection flash
limit is activated
Red and Blue
Light Blinking
Alternately
Stop shooting or turn off the
flash until it is cooled down.
Status
Description
Action
Red Light Lit
The flash is charged and
ready to flash
Normal
Wait until flash is fully chargedBlue Light Lit
Flash charging is not
completed
a. The battery power is low,
and the flash is going to
power off automatically.
b. Overheating warning
a. Please change the battery.
b. Reduce the flash frequency or
stop shooting until the flash is
cooled down.
Blue Light
Blinking
Reduce the flash frequency or
stop shooting until the flash is
cooled down.
Overheating warning
Red Light
Blinking
Status Description
Transmission OK
Sending or receiving
triggering instruction
Blue
Red
Status
Description
Flash recycle of the slave
unit is not completed.
Flash recycle of the slave
unit completed.
Blinking
Off
4.LINK Indicator Status
Description
5.Slave Unit Recycle Indicator
Description
Sound
Description
Power on; sound prompt on; flash OK
The flash exposure may be excessive.
Normal
Adjust exposure
settings or change
shooting conditions.
DiDi
Action
DiDiDi-DiDiDi
The flash exposure may be insufficient.
Adjust exposure
settings or change
shooting conditions.
Di Di Di
The flash isn’ t fully charged.
Wait until flash is fully
charged.
Di--DiDi DiDi
The flash has been fully charged and is
ready for shooting.
Normal
Di—Di lasts for
seconds
The battery power is low, and the flash is
going to power off automatically.
Please change the
battery.
Di-continuousl
y and quickly
Sleep mode is activated, and the flash is
going to power off automatically.
Please turn off the flash
and turn it on again.
Di-Di-Di-
8

Yongnuo YN650EX-RF Specifications

General

Brand	Yongnuo
Model	YN650EX-RF
Category	Camera Accessories
Language	English