10
NOTE: Before you run on the treadmill for the rst time, use the Quick Start instructions on page 11 and allow the treadmill to
run independently for 10 minutes. Check the running mat is tightened correctly and runs smoothly. If you think the mat needs
adjusting please see page 15 for more details.
!
Final Checks
Power up
Your treadmill is now assembled. Please make the following nal checks before you power up for the rst time.
•
Make sure all screws / bolts are tightened
•
Make sure the treadmill is on a at, level surface.
1. Plug one end of power cable into the treadmill as shown
2. Plug the other end into a suitable AC outlet (220-240 volt, 50Hz)
3. Switch the treadmill on using the on / o switch
4. Attach the safety key to the console
safety switch
ON/OFF
power cord
To Next Page
Loading...
