York Experience - Handlebar and Computer Installation

3. Fix the handlebars
94
102
68
94
102
68
8
FIXINGS:FIXINGS:
x 2
Part
No.
102
Part
No.
94
x 2
x 2
Part
No.
68
4. Fix the computer in place
1. Ask someone to help you hold the console
assembly in front of both handle bar posts closely.
2. Connect the computer wires plugs to the hand
pulse sensor wire sockets protuding at the top of
the handle bar posts
Note: Take Care to ensure the wires are connected
as tightly as possible; Slide the rest of the connect
wires into the computer console post before
the handlebar post attchment.
1. Attach the handle bars onto the
handle bar post via plastic connect
sockets (68) properly as shown
2. Fit the handle bar in position with 2
x allen head bolt (94) and 2 x curve
washer (102) from the front end of
the handle bar posts