EasyManua.ls Logo

York G8C10016(MU,MD)C12 User Manual

York G8C10016(MU,MD)C12
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TECHNICAL GUIDE
80 AFUE
MULTI-POSITION
GAS FURNACES
MODELS: G8C SERIES
4-POSITION
50-125 MBH INPUT
3-POSITION
150 MBH INPUT
EFFICIENCY
RATING
CERTIFIED
ISO 9001
Certified Quality
Management System
270844-YTG-A-0407
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
®
DESCRIPTION
These compact units (31-1/2" high) employ induced combus-
tion, reliable electronic ignition and high heat transfer heat
exchangers. The units may be factory shipped for upflow/hor-
izontal application and converted for downflow application.
These units may also be factory shipped for downflow appli-
cation and converted for upflow/horizontal applications
Note: The 150 MBH input model is upflow/horizontal only and
may not be converted to the downflow position.
These furnaces are designed for residential installation in a
basement, closet, alcove, attic, or garage. All units are factory
assembled, wired and tested to assure safe dependable and
economical installation and operation.
These units are Category I listed and may be common vented
with another gas appliance as allowed by the National Fuel
Gas Code.
WARRANTY
20-year limited warranty on the heat exchanger.
5-year limited parts warranty.
FEATURES
4-position (MU) upflow models allow horizontal-left, hori-
zontal-right, downflow and convertible applications
4-position (MD) models allow downflow and convertible
upflow/horizontal applications
3-position (UH) 150 MBH input model allows upflow, hori-
zontal-left and horizontal-right application
Reliable, hot surface ignitor
Integrated control module for simplicity and reliable, eco-
nomical operation
Built-in self-diagnostics with fault code display
100% shut off main gas valve for added safety
Rollout safety control
Low unit amp requirement for easy application
High quality inducer motor for quiet operation
40 VA, fuse protected control transformer
Terminals for controlling humidifiers and EAC’s
Easy to connect power and control wiring
Efficiency ratings of 80 AFUE
Cooling blower relay supplied for easy installation of add-
on cooling
Blower off-delay for cooling SEER improvement
Multi-speed PSC, direct-drive blower motors to match
cooling requirements
Adjustable fan-off settings to eliminate "cold-blow"
Compact 31-1/2-in height allows installation in small space
confines
All models are propane convertible with factory kit
Pre-painted exterior provides attractive, durable finish
Models are not approved for LoNox applications
Question and Answer IconNeed help?

Do you have a question about the York G8C10016(MU,MD)C12 and is the answer not in the manual?

York G8C10016(MU,MD)C12 Specifications

General IconGeneral
ModelG8C10016(MU, MD)C12
TypeGas Furnace
AFUE80%
Blower TypeMulti-speed
Fuel TypeNatural Gas
Installation TypeUpflow/Horizontal
Blower MotorPSC
StagesSingle Stage
Ignition TypeHot Surface Ignition
Heat ExchangerAluminized Steel
Filter Size16x25x1 inches
Vent Size4 inches
Heating Capacity100, 000 BTU/hr
Gas ValveSingle Stage Gas Valve

Summary

York Gas Furnace Technical Guide

80 AFUE Multi-Position Furnaces

Details on 80 AFUE multi-position gas furnaces.

G8C Series Models

Identifies the specific G8C series gas furnace models.

Product Description

Overview of furnace features, applications, and construction.

Key Product Features

Highlights key operational and design features of the furnaces.

Warranty Information

Details limited warranty on heat exchanger and parts.

Cabinet and Duct Dimensions

Upflow Model Ratings and Electrical Data

Blower Performance Data

Return Air and Filter Guidelines

Filter Performance and Pressure Drop

Recommended Filter Sizes

Filter Pressure Drop Performance

System Airflow Calculation with Filters

Combustible Clearances

Available Accessories

Related product manuals