York H5DB048 User Manual

036-21024-006 Rev. D (0403)
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
®
TECHNICAL GUIDE
STELLAR 2000
TM
SPLIT-SYSTEM AIR CONDITIONERS
10 SEER
MODELS: H*DB018 THRU 060
(1 THRU 5 NOMINAL TONS, 1 PH)
H*DB036 THRU 076
(3 THRU 6-1/3 NOMINAL TONS, 3 PH)
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at www.york.com for the most
up-to-date technical information.
Additional rating information can be found at
www.ariprimenet.org.
Models 018-048
Model 060
LISTED
This product was manufactured
in a plant whose quality system
is certified/registered as being
in conformity with ISO 9001.
Certification applies only
when the complete
system is listed
with ARI.
R
N
E
M
P
I
U
Q
E
T
Y
R
A
T
I
N
U
0
1
2
A
R
I
R
A
D
N
A
T
S
D
I
S
N
O
T
C
E
S
F
O
C
C
I
F
I
T
R
E
N
O
I
T
A
H
T
I
W
C
G
N
I
Y
L
P
M
O
S
A
I
R
A
O
T
D
E
I
F
I
T
R
E
C
R
E
R
U
T
C
A
F
U
N
A
M
C
-
G
N
I
N
O
I
T
I
D
N
O
R
I
A
DESCRIPTION
The HDB Series condensing unit is the outdoor part of a ver-
satile system of air conditioning. It is designed to be custom-
matched with one of YORK's complete line of evaporator sec-
tions, each designed to serve a specific function. Matching
Air Handlers are available for upflow, downflow or horizontal
application to provide a complete system. Electric heaters are
available if required. Add-On coils are available for use with
upflow, downflow or horizontal furnaces.
WARRANTY
Single Phase Units:
5-year limited parts warranty.
5-year limited compressor warranty.
Three Phase Units:
1-year limited parts warranty.
5-year limited compressor warranty.
FEATURES
• QUALITY CONDENSER COILS - The coil is constructed
of enhanced copper tube and aluminum fins.
• COIL PROTECTION - Coils are protected from damage by
a polymer mesh applied between the coil face, and a PVC
coated steel coil guard.
• PROTECTED COMPRESSOR - The compressor is inter-
nally protected against high pressure and temperature.
This is accomplished by the simultaneous operation of
high pressure relief valve and a temperature sensor which
protects the compressor if undesirable operating condi-
tions occur. A liquid line filter-drier further protects the
compressor.
• DURABLE FINISH - Cabinet is made of powder painted
steel over pre-primered steel. The pre-treated galvanized
steel provides a better paint to steel bond, which resists
corrosion and rust creep. Special primer formulas and
automotive quality finish insure less fading when exposed
to sunlight.
• LOWER INSTALLED COST - Installation time and costs
are reduced by easy power and control wiring connec-
tions. Discharge line heat exchanger knockouts are pro-
vided, if required. Both quick connect and sweat connect
models are available. Both service valves are firmly affixed
to the unit. The sweat unit contains enough refrigerant for
matching indoor coils and 15 feet of interconnecting pip-
ing. The small base dimension means less space is
required on the ground or roof.
• TOP DISCHARGE - The warm air from the top mounted
fan is blown up away from the structure and any landscap-
ing. This allows compact location on multi-unit applica-
tions.
• LOW OPERATING SOUND LEVEL - The upward air flow
carries the normal operating noise up away from the living
area. The rigid top panel effectively isolates any motor
sound. Isolator mounted compressor and the rippled fins
of the condenser coil muffle the normal fan motor and
compressor operating sounds.
• LOW MAINTENANCE - Long life permanently lubricated
motor- bearings need no annual servicing.
• EASY SERVICE ACCESS - Fully exposed refrigerant
connections, a single panel covering the electrical con-
trols, and the molex plug in the control box connecting the
condenser fan make for easy servicing of the unit.
• SECURED SERVICE VALVES - Secured re-usable ser-
vice valves are provided on both the liquid and vapor
sweat connections for ease of evacuating and charging.
• U.L. and C.U.L. listed - approved for outdoor application.
Certified in accordance with the Unitary Small Equipment cer-
tification program, which is based on ARI Standard 210/240.

York H5DB048 Specifications

General

Model Number	H5DB048
Category	Air Conditioner
BTU	48000
Cooling Capacity	48000 BTU/h
Heating Capacity	48000 BTU/h
Energy Efficiency Ratio (EER)	10.5
Refrigerant	R-410A
Power Supply	208/230V, 60Hz
Operating Temperature (Heating)	75°F

Summary

Product Description and Features

Product Description

Overview of the HDB Series condensing unit as part of a versatile air conditioning system.

Warranty Information

Details on limited warranty coverage for single and three-phase units.

Key Features

Key features of the HDB Series condensing units, including coil protection, compressor protection, and durable finish.

Physical and Electrical Data

1-Phase Physical and Electrical Data

Technical specifications for 1-phase HDB series models, including voltage, ampacity, and motor details.

3-Phase Physical and Electrical Data

Technical specifications for 3-phase HDB series models, including voltage, ampacity, and motor details.

Refrigerant Charge and Orifice Sizing

1-Phase Systems

Details on R-22 refrigerant charge and orifice sizes for various matched 1-phase systems.

3-Phase Systems

Details on R-22 refrigerant charge and orifice sizes for various matched 3-phase systems.

Installation Procedures

Steps for verifying and adjusting refrigerant charge and orifice size for system compatibility and performance.

Cooling Capacity with Air Handler Coils

1-Phase Cooling Capacity (N1AH/G2FD)

Cooling capacity data for 1-phase systems paired with N1AH and G2FD air handler coils.

3-Phase Cooling Capacity (N1VS)

Cooling capacity data for 3-phase systems using N1VS variable speed air handlers.

1-Phase Cooling Capacity (N1VS)

Cooling capacity data for 1-phase systems using N1VS variable speed air handlers.

1-Phase Cooling Capacity (F2RP/RC/FP/FC)

Cooling capacity data for 1-phase systems paired with F2RP, RC, FP, or FC fan coil units.

1-Phase Cooling Capacity (F2RP/RC/FP/FC) - Cont.

Continuation of cooling capacity data for 1-phase systems paired with F2RP, RC, FP, or FC fan coil units.

3-Phase Cooling Capacity (F2RP/RC/FP/FC)

Cooling capacity data for 3-phase systems paired with F2RP, RC, FP, or FC fan coil units.

3-Phase Cooling Capacity (K2EU)

Cooling capacity data for 3-phase systems using K2EU air handler units.

1-Phase Cooling Capacity (M1HC)

Cooling capacity data for 1-phase systems using M1HC air handler units.

Cooling Capacity with Furnace and Coils

H4DB018 with Furnaces (575-725 CFM)

Cooling capacity data for H4DB018 when matched with furnaces in the 575-725 CFM range.

H4DB024 with Furnaces (700-900 CFM)

Cooling capacity data for H4DB024 when matched with furnaces in the 700-900 CFM range.

H4DB030 with Furnaces (875-1125 CFM)

Cooling capacity data for H4DB030 when matched with furnaces in the 875-1125 CFM range.

H4DB036S06 with Furnaces (1050-1350 CFM)

Cooling capacity data for H4DB036S06 when matched with furnaces in the 1050-1350 CFM range.

H4DB036S25,46 with Furnaces (1050-1350 CFM)

Cooling capacity data for H4DB036S25,46 when matched with furnaces in the 1050-1350 CFM range.

H5DB042 with Furnaces

Cooling capacity data for H5DB042 when matched with various furnace models and CFM ranges.

H5DB048 with Furnaces

Cooling capacity data for H5DB048 when matched with various furnace models and CFM ranges.

H4DB060 with Furnaces

Cooling capacity data for H4DB060 when matched with various furnace models and CFM ranges.

H4DB060S25,46 with Furnaces

Cooling capacity data for H4DB060S25,46 when matched with various furnace models and CFM ranges.

Cooling Performance Data

Performance at Various Temperatures

Detailed cooling performance metrics (TC, SC, KW) for various models at different condenser air temperatures.

Performance Multipliers

Factors used to adjust cooling performance when matching with different indoor coil sections.

Typical Installation Overview

Diagram and notes illustrating the typical installation of the outdoor condensing unit.

Typical Field Wiring Diagrams

1-Phase Application Wiring

Typical field wiring diagram for single-phase HVAC system applications.

3-Phase Application Wiring

Typical field wiring diagram for three-phase HVAC system applications.

Accessories and Sound Ratings

Available Accessories

Information on optional accessories such as Hard Start Kits, Compressor Blankets, and Room Thermostats.

Sound Ratings

Sound level ratings in decibels for various HDB outdoor unit models.

Refrigerant Line Sizes

Specifications for refrigerant liquid and vapor line connection sizes for 1-phase and 3-phase HDB models.

Detailed Cooling Performance Data (H4DB018)

H4DB018 Performance with Indoor Coils

Detailed cooling performance data (TC, SC, KW) for the H4DB018 model matched with various indoor coils.

Performance Multipliers (H4DB018)

Factors to adjust cooling performance for H4DB018 when matched with different indoor coil sections.

Detailed Cooling Performance Data (H4DB024)

H4DB024 Performance with Indoor Coils

Detailed cooling performance data (TC, SC, KW) for the H4DB024 model matched with various indoor coils.

Performance Multipliers (H4DB024)

Factors to adjust cooling performance for H4DB024 when matched with different indoor coil sections.

Detailed Cooling Performance Data (H4DB030)

H4DB030 Performance with Indoor Coils

Detailed cooling performance data (TC, SC, KW) for the H4DB030 model matched with various indoor coils.

Performance Multipliers (H4DB030)

Factors to adjust cooling performance for H4DB030 when matched with different indoor coil sections.

Detailed Cooling Performance Data (H4DB036)

H4DB036 Performance with Indoor Coils

Detailed cooling performance data (TC, SC, KW) for the H4DB036 model matched with various indoor coils.

Performance Multipliers (H4DB036)

Factors to adjust cooling performance for H4DB036 when matched with different indoor coil sections.

Detailed Cooling Performance Data (H5DB042)

H5DB042 Performance with Indoor Coils

Detailed cooling performance data (TC, SC, KW) for the H5DB042 model matched with various indoor coils.

Performance Multipliers (H5DB042)

Factors to adjust cooling performance for H5DB042 when matched with different indoor coil sections.

Detailed Cooling Performance Data (H5DB048)

H5DB048 Performance with Indoor Coils

Detailed cooling performance data (TC, SC, KW) for the H5DB048 model matched with various indoor coils.

Performance Multipliers (H5DB048)

Factors to adjust cooling performance for H5DB048 when matched with different indoor coil sections.

Detailed Cooling Performance Data (H4DB060)

H4DB060 Performance with Indoor Coils

Detailed cooling performance data (TC, SC, KW) for the H4DB060 model matched with various indoor coils.

H4DB060S25,46 Performance with Indoor Coils

Detailed cooling performance data (TC, SC, KW) for the H4DB060S25,46 model matched with various indoor coils.

Performance Multipliers (H4DB060)

Factors to adjust cooling performance for H4DB060 when matched with different indoor coil sections.

Detailed Cooling Performance Data (H4DB076)

H4DB076 Performance with Indoor Coils

Detailed cooling performance data (TC, SC, KW) for the H4DB076 model matched with various indoor coils.

Matching Indoor Components

Add-On Coils for Furnaces

Overview of available add-on coils designed for furnace applications, including different types and configurations.

Air Handlers for Non-Furnace Applications

Overview of modular blower and fan coil unit air handlers for non-furnace applications.