700699-YTG-B-0812
6 Johnson Controls Unitary Products
— = Not applicable.
MA Modular Air Handlers use Coil Only Ratings.
TCGF42S41S3(E)
MV16C 21.0 FC60C 1400 40.5 30.6 15.50 12.75
MV20D 24.5 FC/MC48D 1400 42.0 31.4 15.50 13.00
MV20D 24.5 FC/MC60D 1400 41.5 31.4 15.50 13.00
MV20D 24.5 FC/MC62D 1400 42.0 31.4 16.00 13.00
MV20D 24.5 FC64D 1300 42.0 31.4 16.50 13.50
MX16C 21.0 FC/MC43C 1365 41.0 30.6 16.00 13.25
MX16C 21.0 FC/MC48C 1390 41.5 31.2 16.25 13.25
MX16C 21.0 FC60C 1420 40.5 30.8 16.00 13.00
MX20D 24.5 FC/MC48D 1415 41.5 31.2 16.00 13.25
MX20D 24.5 FC/MC60D 1470 41.0 31.6 16.25 13.25
MX20D 24.5 FC/MC62D 1470 41.5 32.2 16.25 13.50
MX20D 24.5 FC64D 1470 43.0 33.4 16.75 13.75
TCGF48S41S4(E)
AHE48D 24.5 – 1600 46.0 32.6 15.25 12.50
AHE60D 24.5 – 1565 46.5 33.2 15.75 13.00
AHR48D 24.5 – 1610 45.5 32.0 14.25 11.75
AHR60D 24.5 – 1620 46.5 33.0 14.50 12.25
AHV48D 24.5 – 1585 45.5 31.9 14.75 12.25
AHV60D 24.5 – 1570 46.0 32.4 15.00 12.50
AV*48 24.5 – 1625 46.0 32.4 15.00 12.50
AV*60 24.5 – 1560 46.0 32.6 15.25 12.50
MV16C 21.0 FC/MC48C 1625 45.0 33.2 15.00 12.25
MV16C 21.0 FC60C 1625 46.0 32.2 15.00 12.50
MV20D 24.5 FC/MC48D 1620 45.5 33.4 15.50 12.50
MV20D 24.5 FC/MC60D 1600 46.0 32.2 15.00 12.25
MV20D 24.5 FC/MC62D 1630 47.0 33.8 15.50 12.75
MV20D 24.5 FC64D 1630 47.5 34.2 16.00 13.00
MX16C 21.0 FC/MC48C 1685 45.5 34.0 15.25 12.25
MX16C 21.0 FC60C 1420 45.5 31.0 15.75 13.00
MX20D 24.5 FC/MC48D 1525 45.5 33.4 15.50 12.75
MX20D 24.5 FC/MC60D 1470 45.5 31.2 16.00 13.00
MX20D 24.5 FC/MC62D 1605 47.0 34.0 16.00 13.25
MX20D 24.5 FC64D 1605 47.5 34.4 16.50 13.50
TCGF60S41S4(E)
AHE60D 24.5 – 1835 56.5 39.6 14.50 12.50
AHR60D 24.5 – 1870 56.0 39.1 13.75 11.75
AHV60D 24.5 – 1635 55.5 37.4 14.25 12.00
AV*60 24.5 – 1730 55.5 37.4 14.50 12.00
MV20D 24.5 FC/MC60D 1845 56.0 38.1 14.50 12.25
MV20D 24.5 FC/MC62D 1855 56.5 39.6 14.25 12.25
MV20D 24.5 FC64D 1855 57.5 40.5 14.50 12.50
MX20D 24.5 FC/MC60D 1780 55.5 37.4 14.50 12.50
MX20D 24.5 FC/MC62D 1795 57.0 39.6 15.00 12.75
MX20D 24.5 FC64D 1795 57.5 41.0 15.25 13.00
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
Cooling MBH based on 80°F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in
watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER
COIL
MODEL
1
COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
TOTAL SENS.
14.5 SEER AC WITH AIR HANDLERS
To Next Page
Loading...
