York MVC16CN21 - User Manual

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
5151065-YTG-H-0118
TECHNICAL GUIDE
MODULAR VARIABLE SPEED ECM
COMMUNICATING AIR HANDLERS
FOR USE WITH SPLIT-SYSTEM
COOLING & HEAT PUMPS
MODELS: MVC SERIES
1
Due to continuous product improvement,
specifications are subject to change without notice.
Visit us on the web at:
www.upgnet.com and www.york.com
A
dditional rating information can be found at:
www.ahridirectory.org
WARRANTY SUMMARY
Standard 5-year limited parts warranty.
Extended 10-year limited parts warranty when product is
registered online within 90 days of purchase for replacement
or closing for new home construction.
®
®
DESCRIPTION
This unique modular system allows the flexibility to handle any
application. These versatile MVC blowers may be used for
upflow, downflow, or horizontal left or right applications. They
may be combined with cased coils to function as a cooling only
unit or with a heat pump including electric heat for 1 and 3
phase applications.
FEATURES
COMMON MVC AIR HANDLER AND MATCH-UP CM COIL
Rigid Case Construction - An interior endoskeleton for
structural support, smooth side, and locks in insulation.
Powder-painted - G30 galvanized steel case provide a coated
edge that resists corrosion and rust creep.
Quality Construction - Structural components are made of
Aluminum or G90 galvanized steel to prevent corrosion.
Improved Insulation Design - Single piece with no external
screws to reduce thermal transmission paths to prevent
sweating. Foil faced insulation for ease of cleaning.
Case Depth - These models have 20.5” casing which provide
ease of attic access and tight applications.
MVC AIR HANDLERS
Factory Sealed - Achieves 2% or less total airflow leakage rate
at duct leakage test conditions in positive and negative
pressure for system airflow verification.
Electric Heat Kits - 6HK series of field installed electric heat
kits are available for installation-friendly and easy service
applications.
Blowers - All models use direct-drive, variable speed ECM
motors.
CM COILS
MaxAlloy
TM
Coil - Long life aluminum coils built to deliver
lasting performance, efficiency and reliability.
Thermostatic Expansion Valve - The accessory bolt-on TXV
provides easy installation to convert the indoor coil to the
required refrigerant that does not require brazing to replace or
install. Some models are available with factory installed TXV.
Thermoset Drain Pan - Low retention and positive slope for
drainage to reduce potential mold or contaminants.
Accessories - A full line of matching accessories available for
use with the blower and coils to provide for any type of
application.

York MVC16CN21 Specifications

General

Brand	York
Model	MVC16CN21
Category	Air Handlers
Language	English

Summary

TECHNICAL GUIDE

MODULAR VARIABLE SPEED ECM AIR HANDLERS

Modular variable speed ECM communicating air handlers for split-system cooling & heat pumps.

KEY FEATURES

PRODUCT NOMENCLATURE

DIMENSIONS AND DUCT CONNECTIONS

MVC MODULAR AIR HANDLER DIMENSIONS

Provides detailed dimensions and wiring knockout information for MVC air handlers.

CM MULTI-POSITION COIL DIMENSIONS

Lists dimensions, weight, and refrigerant connections for CM multi-position coils.

DIMENSIONS AND COIL SPECIFICATIONS

COOLING CAPACITY DATA

Provides cooling capacity (MBH) for various models under different temperature and pressure conditions.

COOLING CAPACITY DATA (CONTINUED)

PHYSICAL AND ELECTRICAL DATA

COOLING ONLY SPECIFICATIONS

Details physical dimensions, motor specs, voltage, amps, and filter size for cooling-only units.

ELECTRICAL DATA FOR COOLING ONLY

ELECTRIC HEAT PERFORMANCE DATA

PERFORMANCE FOR 208;230 V SINGLE;THREE PHASE

Details kW and MBH performance and staging for electric heater kits across voltage and phase.

SINGLE SOURCE POWER SUPPLY ELECTRICAL DATA

POWER WIRING AND ACCESSORIES

LINE CONNECTIONS AND WIRING DIAGRAMS

Illustrates single and multi-source power wiring for 1-phase and 3-phase electric heat options.

TYPICAL THERMOSTAT CONNECTION DIAGRAMS

COOLING-ONLY AND ELECTRIC HEAT WIRING

Wiring diagrams for typical A/C, A/C with electric heat, and A/C with cooling/heat applications.

TWO-STAGE HEAT PUMP WIRING DIAGRAMS

Wiring diagrams for two-stage heat pump systems with specific control boards.

COMMUNICATING SYSTEM WIRING DIAGRAMS

AIR FLOW DATA

COOLING AND HEAT PUMP CFM DATA

Table showing airflow (CFM and m3/min) for cooling and heat pump modes across various models and taps.