York Predator XP Series Technical Guide

®
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
528195-YTG-I-0513
TECHNICAL GUIDE
Description
ASHRAE 90.1 COMPLIANT
YORK
®
Predator
®
units are convertible single packages with a
common footprint cabinet and common roof curb for all 6-1/2
through 12-1/2 ton models. All units have two compressors with
independent refrigeration circuits to provide 2 stages of cooling.
The units were designed for light commercial applications and
can be easily installed on a roof curb, slab, or frame.
All Predator
®
units are self-contained and assembled on rigid
full perimeter base rails allowing for 3-way forklift access and
overhead rigging. Every unit is completely charged, wired,
piped, and tested at the factory to provide a quick and easy field
installation.
All units are convertible between side and down airflow.
Independent economizer designs are used on side and down
discharge applications, as well as all tonnage sizes.
Predator
®
XP units are available in the following configurations:
heat pump and heat pump with electric heat. Electric heaters
are available as factory-installed options or field-installed
accessories.
Tested in accordance with:
R-410A
XP SERIES
6-1/2 THRU 12-1/2 TON
60 Hertz
6-1/2 THROUGH 10 TON
12-1/2 TON
®

York Predator XP Series Specifications

General

Series	Predator XP Series
Refrigerant	R-410A
Type	Heat Pump
Cooling Capacity	Up to 60, 000 BTU/h
Heating Capacity	Up to 60, 000 BTU/h
Warranty	10-year limited warranty on compressor