What to do if my York s1-tbsu32p7y Thermostat air conditioning does not turn on?
If your York thermostat isn't turning on the air conditioning, it might be because the cooling setpoint is set too high. Try lowering the cooling setpoint or lowering the cooling set-point limit.
Why is the display blank on my York s1-tbsu32p7y?
If your York thermostat display is blank, it indicates a lack of proper power. Ensure that the power to the furnace is on and that you have 24vac between R & C.
What to do if both heat and cool come on when calling for cooling with my York s1-tbsu32p7y?
If your York thermostat is calling for cooling, but both the heat and cool are activated, it means the thermostat equipment jumper is configured for “HP” while your HVAC unit is a Gas/Electric. To resolve this, set the equipment jumper for “Gas”.
What to do if my York s1-tbsu32p7y heating does not turn on?
If your York thermostat isn't turning on the heating, it might be because the heating setpoint is set too low. Try raising the heating setpoint or raise the heating set- point limit.
General| Brand | York |
|---|---|
| Model | s1-tbsu32p7y |
| Category | Thermostat |
| Language | English |
Definitions for essential thermostat terms like Deadband, Setpoint, and Auto-Changeover.
Introduction to the thermostat's backlit display, front panel buttons, and icons.
Explanation of various screen elements, indicators, and data displays.
Steps for setting the clock, day, and choosing the system mode (Heat, Cool, Auto).
How to adjust temperatures and view indoor, outdoor, or remote sensor readings.
Procedure for replacing the old thermostat and connecting wires to the new unit.
Guides for connecting wires to terminals based on system type.
Visual examples of wiring configurations for common HVAC systems.
Settings for the thermostat's backlight brightness and screen scrolling behavior.
Monitoring equipment usage and configuring service reminders.
Instructions for setting up daily temperature schedules and time periods.
Setting up programming types (7-day, 1-day, 5/2-day) and available system modes.
Setting limits for heat/cool setpoints and configuring cycles per hour.
Programming fan operation, delays, and comfort recovery features.
Advanced settings for humidity control, dual fuel systems, and auxiliary outputs.
Accessing tests for outputs, sensor calibration, and system diagnostics.
Identifying and resolving common thermostat malfunctions.
Information regarding the product's warranty period, coverage, and exclusions.
To Next Page
