York Solution - Preparation for Disassembly; Component Labeling Before Disassembly

YORK INTERNATIONAL
8
FORM 102.20-FA1 (1104)
IAQ
1.0 PREPARATION
ORDER PARTS THAT MAY BE NEEDED FOR REAS-
SEMBLY
Replacement gaskets, screws, cable ties, etc. (refer to
Tables 1 & 2).
TOOLS NEEDED:
• Drill with No. 3 phillips bit for removing all
panel screws.
• Three Sixteenth” Hex Allen head screwdriver
• Nut setters or socket set, (1/4”, 5/16” 3/8” and
9/16”) for removal of all bulkhead, raceway and
wireway screws.
• Wire cutters
• Four” x four” wood blocks
• Common hand tools
FIG. 1 - LABEL DOOR AND PANELS
Protect all parts and porous materi-
als from rain and other sources of
moisture. Decontaminate or replace
as needed to ensure microbial growth
is not introduced to the air handler.
LABEL ALL DOORS, PANELS, ETC.
Before disassembly, label all doors, panels, raceways,
wireways components and wiring with masking tape
and bold marker to ensure proper location when re-
assembling unit. Identify orientation with arrows in
direction of airfl ow.
RETAIN ALL PARTS REMOVED
NOTES:
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
TOOL LIST: