York SUNLINE 2000 BP 072 User Manual

036-21630-001-B-0904
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
SINGLE PACKAGE HEAT PUMP UNITS
BP 072
6 NOMINAL TONS
ASHRAE 90.1-2001 COMPLIANT
®
TECHNICAL GUIDE
DESCRIPTION
YORK Sunline 2000™ heat pumps are convertible single
package units with a common cabinet and a common roof
curb for the 3-6 ton sizes. The units were designed for light
commercial and commercial applications. They can easily be
installed on a roof curb, slab, roof jack or frame.
All units include:
• Powder Paint finish that meets ASTM-B-117 750 hour
salt spray standards
• Permanently lubricated motors
• Bottom or side air discharge configuration capability
(field convertible)
• Manufactured under the quality standards of ISO9001
• Simplicity
®
Control Board
• Copper tube/aluminum fin coils
• Easy access to all components
• Rigging holes in base rails for lifting
• Fork lift slots on three sides
• Single point power connection
• Complete factory package - tested, charged and wired
• CSA agency listing on all units
WARRANTY
• Factory Limited Parts Warranty
• One-year parts warranty
• A Five-year parts warranty on the compressor and
electric heat elements.

York SUNLINE 2000 BP 072 Specifications

General

Brand	York
Model	SUNLINE 2000 BP 072
Category	Heat Pump
Language	English

Summary

YORK Technical Guide

Unit Overview and Warranty

Introduces the YORK Sunline 2000™ heat pumps, their applications, and warranty terms.

Product Nomenclature

Model Number Configuration

Explains the meaning of each character in the model number for unit customization.

Unit Features and Options

Key Features and Factory Options

Details unit features like Simplicity® Controls, low ambient operation, and factory-installed options.

Field-Installed Accessories

Accessory Options

Lists and describes available accessories for field installation.

Installation and Wiring

Power and Control Wiring Diagrams

Illustrates typical power and control wiring for thermostat connections.

Guide Specifications

Unit Construction, Components, and Performance

Covers unit construction, components, performance characteristics, and electrical requirements.