To Next PageTo Next Page
Need help?Do you have a question about the York VSD 658 and is the answer not in the manual?
General| Category | Inverter |
|---|---|
| Model | VSD 658 |
| Protection Level | IP20 |
| Cooling Method | Forced Air Cooling |
| Input Voltage | 380-480V AC |
| Control Method | Vector control |
Explains symbols used in the document for specific situations and hazards.
Information subject to change without notice; manual updates.
Lists revisions made to the document, including affected pages and descriptions.
Lists related manuals and their form numbers.
Explains the Johnson Controls Conditioned Based Maintenance (CBM) program.
Details the nomenclature for VSD models using a figure and explains part number construction.
Explains how to interpret VSD model part numbers and lists them in a table.
Details the nomenclature for LVD models using a figure and explains component codes.
Explains how to interpret LVD model part numbers and lists them in a table.
Provides an overview of the OptiSpeed compressor drive and its major power blocks.
Describes the optional harmonic filter, its purpose, and components.
Explains differences between G/W designs and VSD/LVD model drives.
Overview of how the OSCD control system connects to control centers.
Details control center components and functions before and after 2005.
Explains the interconnection of OSCD and Harmonic Filter logic boards.
Refers to specific keypad functions and control panel details.
Explains the YORK OSCD's adaptive system for speed reduction, setpoints, and stability.
Discusses causes of instability, speed reduction issues, and surge adjustments.
Details the system architecture with callouts for components in VSD models.
Displays the VSD logic board, located on the panel door.
Displays the SCR trigger board.
Displays the optional harmonic filter logic board.
Displays the gate driver board and power module.
Explains how safety shutdowns are organized and the sequence of events.
Lists safety shutdown messages, their causes, and reset procedures.
Explains how cycling shutdowns are organized and the sequence of events.
Lists cycling shutdown messages and their descriptions.
Indicates that warning messages affect operation but the OSCD is still functional.
Lists warning messages and their descriptions.
Addresses common questions regarding VSD operation and application.
Lists conversion factors for various measurements and temperature.
