York YVAG033 - POWER SUPPLY SPECIFICATIONS; UNIT POWER SUPPLY CABLE SPECIFICATION; SYSTEM POWER SUPPLY DISTRIBUTION

FORM NO.: 6U5M-A11M-NB-EN
JOHNSON CONTROLS 30
Unit Power Supply
1. Unit Power Supply
TABLE 9 – POWER SUPPLY CABLE SPECIFICATION
MODEL TYPE
012 014 016 018 020/022 025 028/033 040
POWER SUPPLY
220V~50Hz 380V
/
400V 3N~50Hz
MAXIMUM OPERATING CURRENT
24A 33A 33A 36A 17A 19A 21A 29A
RECOMMENDED WIRE DIAMETER
4mm2 6mm2 6mm2 6mm2 4mm2 6mm2 6mm2 6mm2
RECOMMENDED BREAKER
(EARTH LEAKAGE PROTECTOR)
C
型
32A 2P
C
型
40A 2P
C
型
40A 2P
C
型
50A 2P
C
型
25A 4P
C
型
25A 4P
C
型
32A 4P
CD
型
40A 4P
Notes:
1. Cable selection specification above is suitable for the conditions where ambient temperature is under 40℃,
local regulations should be referred to for practice.
2. Leakage protector must be deployed, and reliable ground connection should be conducted on site.
3. For any discrepancy on site, like capacitance decreasing, refer to IEC standards and requirements by cable
manufacturers for selection.
4. Only copper conductor can be applied as power supply cable and ZR-RVV type cable is recommended.
2. System Power Supply Distribution
FIGURE 31 – SYSTEM POWER SUPPLY DISTRIBUTION DIAGRAM (012~018)
Cooke Industries - Phone: +64 9 579 2185 Email: sales@cookeindustries.co.nz Web: www.cookeindustries.co.nz