Need help?Do you have a question about the YORKVILLE PX1700 and is the answer not in the manual?
The lightning flash symbol alerts users to dangerous voltage and shock risks.
Follow all instructions, use indoors, clean with dry cloth, and protect the power cord.
Connect to the correct voltage, ensure proper grounding, and use qualified personnel for servicing.
Details the amplifier's design, features like limiters and SPEAKON connectors, and performance aims.
Explains how to connect balanced XLR and 1/4" phone inputs, plus unbalanced signals.
Describes the Mono, Stereo, and Bridge operating modes of the PX1700 amplifier.
The limiter switch adjusts gain to maximize clean power output and protect speakers.
The Protect LED indicates faults like shorted loads, low impedance, or overheating.
Explains the amplifier's protection against short circuits, DC output, and overheating.
Details the fan cooling system, clip LEDs, and the amplifier's reliable design.
Warns of shock hazard if opened and stresses proper speaker connection procedures.
Provides power output measurements at 0.1% distortion, noting use of ideal power lines.
Warns about potential damage to speakers without protection when using bridged mode.
Covers the transferable two/ten-year warranty, its exclusions, and validity in Canada/USA.
General| Channels | 2 |
|---|---|
| Impedance | 2, 4, 8 Ohms |
| Input Impedance (Balanced/Unbalanced) | 20 kOhms / 10 kOhms |
| Input Sensitivity (Vrms) For Full Rated Power @ 8 Ohms | 1.4V |
| Power Output | 1700 Watts |
| Dimensions | 19 x 3.5 x 15.5 inches |
| Continuous Average Power @ 2 Ohms | 850W per channel |
| Bridged Mono Power @ 4 Ohms | 1700 Watts |
| Protection | Thermal, short circuit, DC, overload |
| Cooling | Variable speed fan |
| Input Connectors | XLR / 1/4" Combo Jack |
| Output Connectors | Speakon |
| Dimensions (DWH, inches) | 19 x 3.5 x 15.5 |
| Dimensions (DWH, cm) | 48.3 x 8.9 x 39.4 cm |
| Frequency Response | 20Hz - 20kHz (+0/-0.5dB) |
To Next Page