Need help?Do you have a question about the YORKVILLE 100K and is the answer not in the manual?
General| Effects | Reverb |
|---|---|
| Power | 100W |
| Speakers | 1x12" |
| EQ | 3-band |
| Outputs | 1x1/4" |
Read manual, retain packaging, use correct power source, and ensure proper grounding.
Avoid unstable surfaces, water, liquids, and open flames.
Protect power cord from damage and refer all servicing to qualified personnel.
Details three input channels, their uses, and simultaneous operation capabilities.
Optimized for mics, accepts line level, features Piano Contour for keyboard sounds.
Optimized for line level, sums stereo, includes Reverb switch for selective reverb.
Optimized for line level signals, accepts balanced or unbalanced cables.
Adjusts low and high frequencies for tonal adjustment, with caution for distortion.
Allows insertion of external effects or equalizers into the signal path.
EFX SEND as LINE OUT, EFX RTN as AMP IN for connecting multiple units.
Adds built-in reverb to all channels; control sets level, zero turns reverb off.
Connect headphones to the PHONES jack; internal speaker disconnects. Use stereo headphones.
The LED beside the power switch illuminates when the unit is turned on.
Details jack types and sensitivity levels for each input channel.
Lists woofer and tweeter specifications, including impedance and wattage.
Specifies power output ratings under various load conditions and THD.
Describes cabinet construction material and exterior finish.
Provides physical dimensions (HWD) and total weight of the unit.
Lists voltage, frequency, and current requirements for operation.
Yorkville Sound contact details for their Canadian headquarters.
Yorkville Sound Inc. contact details for their U.S.A. operations.
Yorkville logo and slogan 'Quality and Innovation Since 1963'.
To Next Page
