23
P09: Determines if the bike's
handle operates as a single
unit or has a split function. 0:
Single, 1: Spli.t
P10: Switches between a normal
handle function and a limited
speed handle function, which
caps the speed at 6 km/h.0:
Normal handle. 1:Speed Limited
handle.
P11: Adjusts the level of pedal
assist sensitivity, offering a range
of sensitivity levels (2-64).
P12: Sets the initial power output
when starting to pedal, with settings
to control the acceleration smoothness.
P16: Reset ODO:Press and holdthe
up button for 5 seconds.Pressit for 10
seconds to rest to the factorysettings.
P13: Selects the number of
magnets on the wheel for the
speed sensor, affecting how
the bike calculates speed.
Values: 5/8/12.
P14: Configures the maximum
current output from the controller,
with a range to accommodate
different riding styles and conditions.
Default Value: 12A Values Range:
1-20A.
P15: Controller under voltage
value; helps preventing deep
battery discharge.
To Next Page
Loading...