EasyManua.ls Logo

Yotobike Leopard - Post-Charging Procedures and Tips

Default Icon
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTICE: If your battery displays abnormal charging behavior, such as:
• Longer-than-expected charge time
• Strange smell, smoke, or liquid emanating from battery and/or charger
Overheating battery and/or charger, please stop charging and contact Yotobike immediately.
Power Disconnection and Check:
Begin by unplugging the main power supply from the socket. Then, remove the DC connector from the battery. You can now assess the battery
status via the display screen.
The battery can be recharged whether attached to or detached from the bike.
New batteries may require a longer duration to reach full charge initially.
The charger automatically stops once the battery is fully charged.
Frequent recharging is fine, as the battery does not suffer from memory effect.
Installing the Battery:
Securely hold the battery with one hand. With the other hand, turn the release switch to install the battery. Ensure the battery is locked after installation
to prevent theft.
29
After Charging
Battery Charging Tips
Keep the battery away from direct sunlight, liquids, dirt, debris, and metals during charging.
Avoid charging in extreme temperatures (below 14°F/-10°C or above 104°F/40°C).
Do not cover the charger while in use.
Keep the battery out of children's reach during charging.
Only use an approved Yotobike charger specifically matched to your bike's serial number
Charging Precautions