EasyManua.ls Logo

Yotobike Leopard - Battery Maintenance; Pre-Ride Check and Battery Care; Charger Care Information

Default Icon
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Before riding, verify that the battery is securely fastened to the bike. Test the security by pulling upwards on the battery pack.
Pre-Ride Check
For detailed instructions on charger maintenance and care, please consult the instruction manual provided in the charger box.
Charger Care Information
30
Avoid completely draining the battery. Turn off the power when the charge is low.
Charge the battery fully after every use, regardless of the remaining charge. This prolongs battery life. If not in use for extended periods,
store the battery fully charged and recharge it monthly.
Yotobike is suitable for light rain conditions. Avoid riding in heavy downpours or through flooded areas to prevent damage to the crank and motor.
Battery Maintenance (48V 20Ah Battery with Samsung Cells)
Keep the battery away from open flames and other high-temperature heat sources. Do not expose the battery to direct sunlight or recharge
immediately after use in high-temperature weather.
WARNING: Avoid making any modifications to the battery or motor of your Yotobike. Tampering with the battery or altering the motor
voids the Yotobike warranty. Any issues arising from such modifications will not be eligible for warranty coverage.
Your safety and the integrity of the bike's performance are our top priorities.