You-Q ALEX - 9 Technical Specifications

Technical specifications
28
9 Technical specifications
This product complies with the regulations and guidelines for medical aids
and carries a CE symbol.
The product meets the requirements and standards below. These are
checked by independent institutions.
Standard
Definition/description
Weight
test
dummy
EU guideline
93/42 EEC
Applicable as mentioned in Appendix 1
N/A
NEN-EN
12182 (1999)
The requirements from EN12182 (1999) as mentioned
in NEN-EN 12184 (1999): Technical aids for the
handicapped - General requirements and test methods
October1997
160 kg
NEN-EN
12184 (1999)
Class B
Electric wheelchairs, scooters and accompanying
battery chargers - Requirements and test methods April
1999
160 kg
ISO 7176-8
Requirements and test methods for impact, static and
fatigue strengths July 1998
160 kg
ISO 7176-9
Climate tests for electric wheelchairs
N/A
ISO 7176-14
Requirements and test methods for control systems for
electric wheelchairs 1997
N/A
ISO 7176-16
Requirements for resistance to ignition of upholstered
parts May 1997
N/A
ISO 7176-19
The Alex meets the crash test requirements as
described in ISO 7176-19
75 kg
Controllers
Min.
Max.
Unit
Joystick
N
Swing-away controller
N
Electronic switches
N
Parking brake
N
Installation battery charge plug
N
Batteries
Max.
Unit
Maximum dimensions batteries
260x172x210
10.25x6.75x8.25
mm
inch
Battery capacity
60 / 74
Ah
Battery charger
Max.
Unit
Maximum permissible charging voltage
24
V
Maximum charging current
12
Arms.
Connector type
Neutrik NC3MX
Insulation
Class 2 double insulated