YSOFT SAFEQ USB CARD READER V2 – ADMINISTRATOR’S GUIDE V1.2 [EN] 10/22
3.2 UNMOUNTING OF THE READER MODULE
Removing from the device can be handled by plastic “fork” from the step 3 or screw driver or similar tool.
When reader is connected with holder to device, we have to remove reader from the mounting kit first. Use
plastic “fork” or screw driver and push the reader part, with moving the reader upwards. Steps 1,2 and 3.
Picture 5 - Removing procedure
Reader should recover from the holder. Now we can unscrew the mounting kit from the device and disconnect
the reader with following procedure.
To Next Page
Loading...
Need help?
General