Ysoft SafeQ User Manual

18.01.2011
YSOFT SAFEQ USB CARD READER V2 – ADMINISTRATOR’S GUIDE V1.2 [EN] 19/22
In the Linux OS the usage is similar with command:
Usage: ./usbrdrtool -<parameter> <value> ...
Parameters:
 -i input file (otherwise stdin)
 -o output file (otherwise stdout)
 -l list all configurable readers
 -r select reader number to configure, if not specified then first reader will be used
 -s select serial number of reader to configure
 -k reset the usb device after successful operation
 -u update standard firmware (file on stdin or input file)
 -w update service firmware (file on stdin or input file)
 -j get log (data on stdout or output file)
 -h this help screen
 -v verbose operation
 -t start card testing mode

Ysoft SafeQ Specifications

General

Brand	Ysoft
Model	SafeQ
Category	Touch terminals
Language	English