YT Industries rtfm. - Step 01: Opening the Bikebox; Step 02: Removing the Bike; Step 03: Packaging Removal

ASSEMBLY INSTRUCTIONS
REMOVING THE PACKAGINGREMOVE BIKEOPEN BIKEBOX
STEP
STEP
03
STEP
STEP
02
STEP
STEP
01
a
a
Separate the packaging tape using wire cutters or a box cutter.
Just make sure that you do not damage the BikeBox.
b
b
Now you can pull out the fl aps and open the BikeBox.
a
a
b
b
Pull the bike out of the box.
Make sure the bike stands safely by itself.
a
a
Remove the protective packaging using the appropriate tool.
Use wire cutters for the cable ties. Make sure not to damage the bicycle.
Remove the end caps for the front hub using wire cutters.
Place them in a safe place so that they will not get lost.
b
b
Remove the protective plastic from the handlebar using a knife.
Make sure not to damage the handlebar.
a a a
b b b