YUME Y11+ User Manual

SCOOTER ASSEMBLY
8
1. Take out the handlebar,
align it with the pole and
place it in a suitable
position.
2. Tighten the screws to
hold firmly in place.
1 2
3. Take out the meter,
loosen the two screws on
the meter, and remove it.
4. Finally, align the display
to the center of the
handlebar, then tighten
the screws to complete
the installation process.
3 4
Handlebar Installation

YUME Y11+ Specifications

General

Suspension	Front and rear suspension
Charging Time	6-8 hours
Waterproof Rating	IP54
Tire Size	11 inches
Brakes	Hydraulic disc brakes