The YUTRAX TX210 UTV Jump Seat is an accessory designed to provide additional seating in the bed of a Utility Task Vehicle (UTV). It is engineered for outdoor use and aims to offer a comfortable and secure seating option for passengers during trail riding. The jump seat is intended to be mounted in the UTV bed, facing the rear of the cab, with the backrest positioned against the UTV cab. This specific mounting orientation is crucial for safety and proper operation.
Function Description:
The primary function of the YUTRAX TX210 UTV Jump Seat is to expand the passenger capacity of a UTV. It allows for two additional occupants to be seated safely in the UTV bed, provided the total weight limit is not exceeded. The seat is designed to be sturdy and secure, integrating with the UTV's structure through a series of bolts, locknuts, and safety straps. The design includes a backrest and armrests for passenger comfort and support. The seat can also be flipped up when not in use, offering flexibility for cargo space, though this requires the removal of spring lock pins from the armrests.
Usage Features:
The YUTRAX TX210 UTV Jump Seat is designed with several features to ensure safe and practical use.
- Mounting Versatility: The upright frames of the jump seat can be adjusted to fit UTV beds with widths of 26", 28", or 30", accommodating a range of UTV models. This adaptability is achieved through multiple hole locations in the backrest frame, seat stop tube, and seat frame, allowing users to select the best mounting position that avoids interference with existing UTV frame rails.
- Secure Installation: The installation process involves attaching mounting channels to the bottom of the upright frames, which are then secured to the UTV bed using hex head bolts, steel washers, large fender washers, and locknuts. Spring lock pins are used to attach the jump seat to these channels, ensuring a secure connection. Safety cam straps are also provided to further secure the jump seat to the UTV frame, preventing movement during operation. These straps are designed to form a slip knot, creating a permanent attachment.
- Passenger Safety: The jump seat includes seat belt receivers and a seat belt strap to ensure passengers are properly restrained. Users are explicitly instructed to wear seat belts while seated. Spring lock pins are used to latch the armrests, preventing accidental removal. The manual emphasizes checking that the UTV's tilt bed latch is secured correctly and never unlocking it while passengers are on the jump seat.
- Operational Guidelines: The manual provides clear guidelines for safe operation. It states that the jump seat should only be used for trail riding and that the UTV should not exceed 10 MPH when passengers are in the jump seat. It also advises against driving on uneven terrain, as shifting weight loads could lead to loss of UTV control. The seat must always be mounted facing the rear of the UTV, with the backrest against the UTV cab.
- Flip-Up Functionality: The seat is designed to flip up, which can be useful for maximizing cargo space in the UTV bed when the jump seat is not in use. This feature is secured by a side release buckle with a short and long strap system. The short strap wraps around the rim of the seat frame, and the long strap attaches to the center of the bottom rail on the backrest frame. To enable the flip-up function, the spring lock pins from the armrests must be removed, allowing the armrests to pivot back freely.
- Armrests and Padding: The jump seat includes armrests for passenger comfort and support. These armrests are attached to the outside of the backrest frame. Padded seat and backrest components are provided to enhance comfort, and they are secured to the frame using side release buckles and Velcro, respectively.
Maintenance Features:
While the manual does not detail extensive maintenance procedures, it highlights key aspects for ensuring the longevity and safety of the jump seat.
- Regular Inspection: Users are advised to inspect the jump seat before each and every use. This inspection should focus on checking for any product damage, loose or missing bolts, or hardware. The manual specifically notes that nuts and bolts can become loose over time due to vibration, underscoring the importance of routine checks.
- Tightening Hardware: During assembly, the manual instructs users to finger-tighten all nut and bolt combinations initially and then fully tighten them only after all parts are assembled and aligned. This ensures proper fit and prevents over-tightening during initial stages. For ongoing maintenance, the implication is that any loose hardware identified during inspection should be tightened securely, but without over-tightening or crushing the tubing.
- Warranty and Parts: The product comes with a one-year limited warranty covering defects in materials and workmanship. For replacement parts or warranty service, users are directed to contact the Yutrax Customer Service Department, rather than returning the product to the retailer. This streamlines the process for obtaining necessary components or repairs. Parts can be ordered online or by phone, indicating a support system for maintaining the product.
- Care and Storage (Implied): Although not explicitly detailed, the emphasis on regular inspection and proper assembly suggests that careful handling and appropriate storage would contribute to the product's lifespan. Avoiding exposure to harsh conditions or impacts would likely prevent damage and maintain the structural integrity of the jump seat.
In summary, the YUTRAX TX210 UTV Jump Seat is a practical and versatile accessory designed to enhance the passenger capacity of UTVs. Its features focus on secure installation, passenger safety through restraints and operational guidelines, and user comfort. The maintenance aspects primarily revolve around diligent pre-use inspections and proper tightening of hardware to ensure continued safe operation.
Need help?
General
To Next Page
