Initial Setup
● Connect the monitor to a power outlet.
1. Press the POWER button on the monitor or to turn it on (The indicator will be blue).
2. Connect the relevant cable to the corresponding input on the monitor. The source will be
automatically detected.
3. To change between inputs, press the " E " button to enter the source menu. Use the
" " and " " buttons to choose the input source between Auto Select, DP, HDMI1 and HDMI 2.
DP
HDMI1
HDMI2
Note:
• The refresh rate will be up to 240Hz while using HDMI1(2.0)/HDMI2(2.0)/DP(1.2) port.
-1- -2- -3- -4-
-5- -6- -7- -8- -9- -10-
-11- -12-
-13- -14- -15- -16- -17- -18- -19- -20-
-21- -22- -23- -24- -25- -26- -27- -28-
-29- -30- -31- -32- -33- -34- -35- -36-
-37- -38- -39- -40- -41- -42- -43- -44-
-45- -46- -47- -48- -49- -50- -51- -52-
-53- -54- -55- -56- -57- -58- -59- -60-
-61- -62- -63- -64- -65- -66- -67- -68-
-69- -70-
To Next Page
Loading...
