WARNING
CAUTION
• There is a high voltage inside the product. Never disassemble, repair or modify the product yourself.
－ Contact Z-EDGE Customer Service Center for repairs.
• To move the product, first disconnect all the cables from it, including the power cable.
• If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord
immediately and contact Z-EDGE Customer Service Center.
• Do not let children hang from the product or climb on top of it.
－ Children may become injured or seriously harmed.
• If the product is dropped or the outer case is damaged, turn off the power and disconnect the
power cord. Then contact Z-EDGE Customer Service Center.
－ Continued use can result in a fire or electric shock.
• Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.
－ The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a
serious injury.
• During a lightning or thunderstorm, power off the product and remove the power cable.
• Do not drop objects on the product or apply impact.
• Do not move the product by pulling the power cord or any cable.
• If a gas leakage is found, do not touch the product or power plug.
Also, ventilate the area immediately.
• Do not lift or move the product by pulling the power cord or any cable.
• Do not use or keep combustible spray or an inflammable substance near the product.
• Ensure the vents are not blocked by tablecloths or curtains.
－ An increased internal temperature may cause a fire.
• Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper,
matches, etc) into the product (via the vent or input/output ports, etc).
－ Be sure to power off the product and disconnect the power cord when water or other foreign
substances have entered the product. Then contact Z-EDGE Customer Service Center.
• Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the
product.
－ Be sure to power off the product and disconnect the power cord when water or other foreign
substances have entered the product. Then contact Z-EDGE Customer Service Center.
• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage
burn-in or defective pixels.
－ Activate power-saving mode or a moving-picture screen saver if you will not be using the product
for an extended period of time.
• Disconnect the power cord from the power socket if you do not plan on using the product for an
extended period of time (vacation, etc).
－ Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
• Use the product at the recommended resolution and frequency.
－ Your eyesight may deteriorate.
• Do not put AC/DC adapters together.
Operation
-1- -2- -3- -4-
-5- -6- -7- -8- -9- -10- -11- -12-
-13- -14- -15- -16- -17- -18- -19- -20-
-21- -22- -23- -24- -25- -26- -27- -28-
-29- -30- -31- -32- -33- -34- -35- -36-
-37- -38- -39- -40- -41- -42- -43- -44-
-45- -46- -47- -48- -49- -50- -51- -52-
-53- -54- -55- -56- -57- -58- -59- -60-
-61- -62- -63- -64- -65- -66- -67- -68-
-69- -70-
To Next Page
Loading...
