12
In saltwater conditions clean the camera housing after every use to prevent
salt buildup around the seals and corrosion of the hinge pin. Rinse thoroughly
with non-salt water, shaking dry. Failure to do so could cause failure, leaks
and damage to your camera and the battery.
Types of Mounts
Camera
1x Camera Housing
Joints
1x Straight Joint 2x 90-degree
Joints (Long &
Short)
1x 360-
degree Joint
Mounts
1x Handlebar
Mount
1x Helmet
Mount
1x Tripod Mount
2x Adhesive
Mounts (Flat &
Curved)
!
To Next Page
Loading...
Need help?
General
