To Next Page
G
greg56Aug 13, 2025
How to start a Z GRILLS Grill?
- BBernard RamirezAug 14, 2025
To start your Z GRILLS Grill, set it to the SMOKE setting with the lid open. After 2 minutes, close the lid and then adjust to your desired cooking setting.
How to start a Z GRILLS Grill?
To start your Z GRILLS Grill, set it to the SMOKE setting with the lid open. After 2 minutes, close the lid and then adjust to your desired cooking setting.
How to start a Z GRILLS ZPG-550B correctly?
To start your Z GRILLS Grill, use the SMOKE setting with the lid open. After about 5 minutes, close the lid and then set it to your desired temperature.
Why is my Z GRILLS ZPG-550B not working?
There are several reasons why your Z GRILLS Grill might not be working. First, ensure the power cord is properly plugged in and that the electrical outlet has power. Next, check the fuse on the back of the control; replace it if it's blown. If the draft inducer fan and auger driver motor are both operating, the hot rod may need replacement. If one or both of these are not working, please contact customer support. Remove the control board to check the wires and connections. Finally, check the auger drive motor by turning the unit on and observing the small fan blade on the back of the motor; if the fan doesn't turn, the motor likely needs to be replaced.
What to do if the fire goes out on my Z GRILLS ZPG-550B Grill?
If the fire goes out in your Z GRILLS Grill, it might be due to too much ash. Clean the ash from the grill to resolve this issue. Refer to MAINTENANCE & CLEANING section for detailed instructions.
Why is my Z GRILLS ZPG-550B displaying the wrong temperature?
The temperature displayed on your Z GRILLS Grill can be influenced by environmental factors such as high outside temperature, wind, and direct sunlight. Try placing the unit in a shaded area. You can also open the lid to help reduce the internal temperature.
Why is my Z GRILLS ZPG-550B Grill producing too much smoke or discolored smoke?
Excessive or discolored smoke from your Z GRILLS Grill is often caused by moist pellets. Replace the moist pellets with fresh, dry pellets to solve this problem.
How to troubleshoot Z GRILLS Grill not working?
If your Z GRILLS Grill isn't working, start by ensuring the power cord is properly plugged in and that the electrical outlet is functional. Next, remove the digital control to check the fuse on the back, and replace it if it's blown. If the Draft Inducer Fan and Auger Driver Motor are working, the Hot Rod likely needs replacement. If not, contact customer support. Inspect wires and connectors for secure connections and any damage, seeking assistance from customer support if needed. Finally, check the auger drive motor by turning the unit on and observing the small fan motor blade on the back; if it doesn't turn, the motor requires replacement.
Why does my Z GRILLS Grill show the wrong temperature?
If your Z GRILLS Grill displays an unexpected temperature, remember that environmental factors like high temperature, wind, and direct sun can influence it. Try placing the unit in a shaded area and opening the lid to reduce the internal temperature. After starting your grill and letting it run for about 40 minutes, it should reach your desired temperature.
Overview of all grill components with numerical identifiers.
Procedure for igniting the grill using manual lighting methods.
Overview of all grill components with numerical identifiers.
Procedure for igniting the grill using manual lighting methods.
General